Categorías
Formas de Pago
PayPal
BBV Bancomer

Microcontroladores > dsPIC de Microchip

Microcontrolador dsPIC30F3011

Microcontrolador dsPIC30F3011


Clave: CDI-DSPIC-3011

Precio: $ 167.00 MXN*
* Pesos Mexicanos

dsPIC30F Motor Control 16-bit Digital Signal Controller Seamless migration options from this device to dsPIC33F and PIC24 devices in similar packages.

  • Modified Harvard architecture
  • C compiler optimized instruction set architecture
  • 84 base instructions with flexible addressing modes
  • 24-bit wide instructions, 16-bit wide data path
  • 16 x 16-bit working register array
  • Up to 30 MIPs operation: - DC to 40 MHz external clock input - 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
  • Peripheral and External interrupt sources
  • 8 user selectable priority levels for each interrupt
  • 4 processor exceptions and software traps
  • Primary and Alternate interrupt Vector Tables DSP Engine Features:
  • Modulo and Bit-Reversed Addressing modes
  • Two, 40-bit wide accumulators with optional saturation logic
  • 17-bit x 17-bit single cycle hardware fractional/ integer multiplier
  • Single cycle Multiply-Accumulate (MAC) operation
  • 40-stage Barrel Shifter
  • Dual data fetch Peripheral Features:
  • High current sink/source I/O pins: 25 mA/25 mA
  • Optionally pair up 16-bit timers into 32-bit timer modules
  • 3-wire SPI™ modules (supports 4 Frame modes)
  • I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
  • Addressable UART modules with FIFO buffers Motor Control PWM Module Features:
  • Complementary or Independent Output modes
  • Edge and Center Aligned modes
  • Multiple duty cycle generators
  • Dedicated time base with 4 modes
  • Programmable output polarity
  • Dead time control for Complementary mode
  • Manual output control
  • Trigger for synchronized A/D conversions Quadrature Encoder Interface Module Features:
  • Phase A, Phase B and Index Pulse input
  • 16-bit up/down position counter
  • Count direction status
  • Position Measurement (x2 and x4) mode
  • Programmable digital noise filters on inputs
  • Alternate 16-bit Timer/Counter mode
  • Interrupt on position counter rollover/underflow Analog Features:
  • 10-bit 1 Msps Analog-to-Digital Converter (A/D).
  • A/D Conversion available during Sleep and Idle.
  • 4 Sample/Hold Channels.
  • Multiple Conversion Sequencing Options Special Microcontroller. Features:
  • Enhanced Flash program memory: - 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical).
  • Data EEPROM memory: - 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical).
  • Self-reprogrammable under software control.
  • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up. Timer (OST).
  • Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator. for reliable operation.
  • Fail-Safe clock monitor operation.
  • Detects clock failure and switches to on-chip low power RC oscillator.
  • Programmable code protection.
  • In-Circuit Serial Programming™ (ICSP™).
  • Programmable Brown-out Detection and Reset generation.
  • Selectable Power Management modes - Sleep, Idle and Alternate Clock modes CMOS Technology:
  • Low power, high speed Flash technology.
  • Wide operating voltage range (2.5V to 5.5V).
  • Industrial and Extended temperature ranges.
  • Low power consumption.
  • Back To Top .
  • Show Section Data. Documentation [Hide].

Comentarios: Microcontrolador dsPIC30F3011